Operator's Manual

g011213
Figure5
1.Positive(+)batterycable2.Negative(–)batterycable
Important:Ifyoueverremovethebattery,
ensurethatthebatteryclampboltsare
installedwiththeboltheadspositionedon
thebottomsideandthenutsonthetopside.
Iftheclampboltsarereversed,theymay
interferewiththehydraulictubeswhenyou
shiftthecuttingunits.
7.CoatbothbatteryconnectionswithGrafo112X
skin-overgrease(ToroPartNo.505-47)orlight
greasetopreventcorrosion.
8.Slidetherubberbootoverthepositiveterminal
topreventapossibleshortfromoccurring.
9.Installthebatterycover.
4
InstallingtheRollBar
Partsneededforthisprocedure:
1Roll-barassembly
4Flange-headbolt
4Locknut
1Hoseclamp
Procedure
WARNING
Operatingthemachinewithamodiedor
damagedrollbarmaynotadequatelyprotect
you,causingpossibleinjuryordeathina
rollover.
•Donotinstalladamagedormodiedroll
baronthemachine.
•Replaceadamagedrollbar;donotrepair
oralterit.
1.Lowertherollbarontothetractionunitmounting
brackets,aligningthemountingholes.Ensure
thattheventtubeontherollbarisontheleft
sideofthemachine(Figure6).
g011160
Figure6
1.Rollbar4.Fuellineventtubehose
2.Mountingbracket5.Hoseclamp
3.Venttube
2.Secureeachsideoftherollbartothemounting
bracketswith2angeheadboltsand2locknuts
(Figure6).Torquethefastenersto81N∙m(60
ft-lb).
3.Securethefuellineventhosetotheventtube
ontherollbarwiththehoseclamp.
14