Operator's Manual

7.Torquetheswivelttingsofthereturnandlift
hosesto37to45N∙m(27to33ft-lb).
g346476
Figure14
1.Straightswiveltting
(returnhose)
2.90°swiveltting(lifthose)
8.Cleanhydraulicuidfromthemachine.
6
InstallingtheCarrier
FramestotheCuttingUnits
Partsneededforthisprocedure:
3
CuttingUnit(optionalpart—orderseparately)
PreparingtheCuttingUnits
1.Removethecuttingunitsfromthecartons.
2.Adjustthecuttingunitsasinstructedinthe
Operator’sManualforthecuttingunits.
AssemblingtheCarrierFramesfor
theFrontCuttingUnits
CuttingUnitwithLinks
Note:Thefrontcarrierframesarepartoftheoptional
liftarmkit.
1.Aligntheholesintheplatesofthefront-carrier
framewiththeholesinthecuttingunitmounting
plates(Figure15).
g353162
Figure15
1.Pivottube(front-carrier
frame)
4.Washer
2.Carriagebolt(3/8x2-1/4
inches)
5.Link(cuttingunit)
3.Plate(frontcarrierframe)6.Flangelocknut(3/8inch)
2.Alignawasherbetweenthecarrierplateand
link(Figure15),andlooselyassembletheplates
andspacerwithacarriagebolt(3/8x2-1/4
inches),washer,andangelocknut(3/8inch).
Note:Ifyouarestartingassemblyatthebackof
thecuttingunit,usethemiddleholeoftheplate.
3.Repeatstep2attheotherplateholesandlinks.
4.Torquetheangelocknutsto37to45N∙m(27
to33ft-lb).
5.Repeatsteps1through4fortheotherfront
cuttingunitandcarrierframe.
AssemblingtheCuttingUnitand
RearCarrierFrame
CuttingUnitwithLinks
Note:Therearcarrierframeispartoftheoptional
liftarmkit.
1.Aligntheholeintheplatesrear-carrierframe
withtheholeinthecuttingunitmountingplates
17