Operator's Manual

therearcuttingunitwearbarandthebumper
stop.
Thecorrectclearanceis0.51to2.54mm(0.02
to0.10inch).
5.Repeatsteps1through4asneeded.
6.Lowerthecuttingunits,shutofftheengine,
removethekey,andwaitforallmovingparts
tostop.
7.Tightenthejamnut.
10
AdjustingTireAirPressure
NoPartsRequired
Procedure
Adjustthetireairpressureateachofthetires;referto
CheckingtheTirePressure(page51).
Note:Thetiresareover-inatedforshipping.
11
InstallingtheHoodLatch
CEMachines
Partsneededforthisprocedure:
1Lockbracket
2Rivet
1Washer
1
Screw(1/4x2inches)
1
Locknut(1/4inch)
Procedure
1.Unhookthehoodlatchfromthehood-latch
bracket.
2.Removetherivets(2)securingthehood-latch
brackettothehood(Figure30).Removethe
hood-latchbracketfromthehood.
g012628
Figure30
1.Hood-latchbracket2.Rivets
3.Whilealigningthemountingholes,positionthe
CElockbracketandthehood-latchbracketonto
thehood.Thelockbracketmustbeagainstthe
hood(Figure31).Donotremovetheboltand
nutassemblyfromthelockbracketarm.
g012629
Figure31
1.CElockbracket
2.Boltandnutassembly
4.Alignthewasherswiththeholesontheinsideof
thehood.
5.Rivetthebracketsandthewasherstothehood
(Figure31).
6.Hookthelatchontothehood-latchbracket
(Figure32).
23