Operator's Manual

g336554
Figure71
1.Waterseparator/lter
canister
3.Drainvalve
2.Ventplug
5.Tightenthevalveafterdraining.
6.Starttheengine,checkforleaks,andshutoff
theengine.
Note:Repairallfuelleaks.
7.Closeandlatchthehood.
ChangingtheFuelFilter
Canister
ServiceInterval:Every400hours
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page42).
2.Unlatchandopenthehood,andwaitforthe
enginetocool.
3.Cleantheareawheretheltercanistermounts
(Figure71).
4.Removetheltercanisterandcleanthe
mountingsurface.
5.Lubricatethegasketontheltercanisterwith
cleanoil.
6.Installtheltercanisterbyhanduntilthegasket
contactsthemountingsurface;thenrotatean
additional1/2turn.
7.Starttheengine,checkforleaks,andshutoff
theengine.
Note:Repairallfuelleaks.
8.Closeandlatchthehood.
BleedingAirfromthe
Injectors
Note:Usethisprocedureonlyifthefuelsystemhas
beenpurgedofairthroughnormalprimingprocedures
andtheenginedoesnotstart;refertoBleedingthe
FuelSystem(page36).
1.Whenpossible,preformeachstepinPreparing
forMaintenance(page42).
2.Unlatchandopenthehood,andiftheengine
ishotwaitforittocool.
3.LoosenthetubenutforthefuellinetotheNo.
1fuel-injectornozzle.
g008913
Figure72
1.Fuelinjectors
4.MovethethrottletotheFASTposition.
5.TurnthekeyinthekeyswitchtotheSTART
positionandwatchthefuelowaroundthe
connector.TurnthekeytotheOFFposition
whenthereisacontinuousow.
Important:Topreventoverheatingofthe
startermotor,donotengagethestarterfor
longerthan15seconds.After10secondsof
continuouscranking,wait60secondsbefore
engagingthestartermotoragain.
6.Tightenthetubenutsecurely.
7.Cleananyfuelfromtheengine.
8.Repeatsteps3through7fortheremaining
fuel-injectornozzles.
9.Starttheengine,checkforleaks,andshutoff
theengine.
Note:Repairallfuelleaks.
10.Closeandlatchthehood.
49