Operator's Manual

11
InstallingtheHoodLatch
(CEOnly)
Partsneededforthisprocedure:
1Lockbracket
2Rivet
1Washer
1
Screw(1/4x2inches)
1
Locknut(1/4inch)
Procedure
1.Unhookthehoodlatchfromthehood-latch
bracket.
2.Removetherivets(2)securingthehood-latch
brackettothehood(Figure24).Removethe
hood-latchbracketfromthehood.
g012628
Figure24
1.Hood-latchbracket2.Rivets
3.Whilealigningthemountingholes,positionthe
CElockbracketandthehood-latchbracketonto
thehood.Thelockbracketmustbeagainstthe
hood(Figure25).Donotremovetheboltand
nutassemblyfromthelockbracketarm.
g012629
Figure25
1.CElockbracket
2.Boltandnutassembly
4.Alignthewasherswiththeholesontheinsideof
thehood.
5.Rivetthebracketsandthewasherstothehood
(Figure25).
6.Hookthelatchontothehood-latchbracket
(Figure26).
g012630
Figure26
1.Hoodlatch
7.Screwtheboltintotheotherarmofhood-lock
brackettolockthelatchinposition(Figure27).
Note:Tightentheboltsecurelybutdonot
tightenthenut.
18