Operator's Manual

14
InstallingtheTipperRoller
Kit(Optional)
Partsneededforthisprocedure:
1
Tipperrollerkit(notincluded)
Procedure
Whencuttinginhigherheightsofcut,installtheTipper
RollerKit.
1.Raisethecuttingunitsallthewayup.
2.Locatetheframebracketabovethecenter
cuttingunit(Figure29).
3.Whilepressingdownonthefrontrollerofthe
centercuttingunit,determinewhichholesonthe
tipperbracketalignwiththeframebracketholes
toattainthesamerollercontactwhenthetipper
bracketisinstalled(Figure29).
g016925
Figure29
1.Framebracket2.Tipperbracket
4.Lowerthecuttingunitsandmountthetipper
brackettotheframewiththe2carriagebolts
and2nutssuppliedwiththekit(Figure29).
ProductOverview
g336464
Figure30
1.Enginehood
4.Steeringwheel
2.Operator'sseat
5.Frontcuttingunits
3.Controlarm
6.Rearcuttingunit
Controls
g336509
Figure31
1.Tiltsteeringlever3.Forwardtractionpedal
2.Mow/transportslide
4.Reversetractionpedal
TractionPedals
Pressthetractionforwardpedal(Figure31)tomove
forward.Pressthetractionreversepedal(Figure
31)tomovebackwardortoassistinstoppingwhen
movingforward.Also,allowthepedaltomoveor
moveittotheNEUTRALpositiontostopthemachine.
20