Installation Instructions
Table Of Contents
- .
- 1 Preparing the Machine
- 2 Mounting the Roller Bumper
- 3 Mounting the Hydro Guard
- 4 Installing the Basket Mounting Assemblies
- 5 Installing the Cut-off Bar
- 6 Installing the New Grass Deflector(Front Cutting Units Only)
- 7 Removing the Support Tube
- 8 Assembling the Rear Grass Basket
- 9 Mounting the Baskets to the Cutting Units
- 10 Adjusting the Front Basket Position
- 11 Adjusting the Rear Basket Position
- 12 Adjusting the Rear Basket Lip Bracket
- 13 Adjusting the Rear Grass Shield
- 14 Adjusting the Roller Bumper
g012217
Figure5
1.Bolt(5/16x2-1/4inch)3.Flangenut(5/16inch)5.Leftbasketbracketwithbracket
2.Rightbasketbracketwithguide
4.Carrierframe
5
InstallingtheCut-offBar
Partsneededforthisprocedure:
1
Cut-offbar
4
Bolt(1/4x1-3/4inches)
4
Locknut(1/4inch)
Procedure
1.Removethe4ange-headboltssecuringthefront
grassshieldanddeectorstothecuttingunitframe
(Figure6).
g012218
Figure6
1.Grassshield2.Deectors
2.Removethegrassshield.
3.Looselymountthecut-offbartothecuttingunitframe
with4bolts(1/4x1-3/4inches)and4locknuts(1/4
inch)(Figure7).
5