Service Bulletin

Customer Service Bulletin

Commercial Business Group

Reelmaster

3100-D

Model/Serial Range: Model Number: Serial Numbers:

03200 90101-90342

03201 90101-90954

Subject: Neutral & Mow/Transport Switch Adjustments

An improperly adjusted switch can create “No Start” and “Reel Engagement” problems.

Attached to this Bulletin are Neutral Switch and Mow/Transport Switch adjustment

instructions. Please print a copy of these instructions and include with your

Reelmaster® 3100-D Service Manual and/or operators Manual.

If you have additional questions, contact your local Authorized Toro Distributor.

Ref: 16-04 Copyright



, 2000. The Toro Company

PAGE 1
Customer Service Bulletin Commercial Business Group Reelmaster® 3100-D Model/Serial Range: Model Number: 03200 03201 Subject: Serial Numbers: 90101-90342 90101-90954 Neutral & Mow/Transport Switch Adjustments An improperly adjusted switch can create “No Start” and “Reel Engagement” problems. Attached to this Bulletin are Neutral Switch and Mow/Transport Switch adjustment instructions.
PAGE 2
Neutral & Mow/Transport Switch Adjustment Instructions Reelmaster® 3100-D Neutral Switch Adjustment: 1. Loosen the switch retaining screws leaving slight tension on them. (Fig.1). Neutral Assembly Roller Bearing 2. Turn the ignition key to the ON position. Pump Lever Assembly Neutral Arm Assembly Note: Neutral Arm Assembly Roller Bearing must be centered in the groove on the Pump Lever Assembly before proceeding with adjustment Fig. 1 3.
PAGE 3
Mow/Transport Switch Adjustment: Feeler Gauge Nose of Switch Loosen Switch Assembly Screws (Fig. 3). 1. Shift Slide Assembly to the Mow position. 2. Insert .035” (.889 mm)Feeler Gauge between nose of Switch and Rocker Shaft (Fig. 4). 3. While holding the Feeler Gauge in place, shift the Shift Slide Assembly to the transport position and push switch down until nose of the switch body contacts the feeler gauge. Fig. 3 Rocker Shaft 4.