Installation Instructions

ManualsBrandsToro ManualsAttachmentsWeight Kit, RM 3100-D Cutting Unit

FormNo.3407-851RevA

WeightKit

RM3100-DCuttingUnit

ModelNo.03244

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Determinethepositionoftheweightsandthereelmotors.

Weight3

O-ring

Bolt6

Installtheweightsontothecuttingunits.

DeterminingtheWeight

Orientation

RefertoFigure1todeterminethepositionoftheweightsand

thereelmotors.

g034633

Figure1

1.Cuttingunit1

4.Weight

2.Cuttingunit2

5.Reelmotor

3.Cuttingunit3

InstallingtheWeights

1.Ifthecuttingunitsareinstalledonthetractionunit,

parkthemachineonalevelsurface,engagetheparking

brake,shutofftheengine,andremovethekey.

2.InstallanO-ringoneachweight(Figure2).

g194896

Figure2

1.O-ring

3.Installaweightontoeachcuttingunit(Figure3).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3407-851*A

Summary of content (2 pages)

PAGE 1
Form No. 3407-851 Rev A Weight Kit RM 3100-D Cutting Unit Model No. 03244 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. Use No parts required – Determine the position of the weights and the reel motors.
PAGE 2
Note: Use Figure 1 to determine where to properly place the weights. Note: Torque the bolts to 37 to 45 N∙m (27 to 33 ft-lb). g194927 Figure 3 1. Weight 2.