Installation Instructions

2.Insertthelonghexagonalendofthebasketrodinto1
basketplateandtheotherendintotheotherbasket
plate(Figure10).
3.Securetheshorthexagonalendoftherodwithaange
nut(5/16inch)andahardenedwasher(Figure10).
Important:Ensurethatthebasketroddoesnot
touchthefrontroller.
g034170
Figure10
1.Basketrod
4.Flangenut(5/16inch)
2.Carriagebolt(3/8x1-3/4
inches)
5.Flangescrew(5/16inch)
3.Hardenedwasher
6.Flangenut(3/8inch)
7
InstallingtheGroomerRodKit
(UnitswithGroomersOnly;
OrderedSeparately)
Partsneededforthisprocedure:
1
Groomerrod
1
Bolt(M10x12mm)
2Washer
Procedure
Note:Thisprocedureisforcuttingunitswithgroomers
installedandreplacestheitemsin6InstallingtheBasketRod
(UnitsWithoutGroomersOnly)(page7).
TheGroomerRodKit(ToroPartNo.131-6845)isordered
separately;contactanAuthorizedToroDealertoorderthekit.
InstallthekitasshowninFigure11.
g028887
Figure11
1.Groomerrod
3.Washer
2.Bolt(M10x12mm)
8