Operator's Manual

35
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After first 10 hours
• Change the engine oil.
• Check the engine belt tension.
• Change the engine oil filter.
• Check the traction belt tension.
• Replace the hydraulic filter.
• Torque the wheel lug nuts.
After first 50 hours • Check the engine RPM (idle and full throttle).
Every 50 hours
• Inspect the air filter, dust cup, and burp valve.
• Lubricate all grease fittings.
• Check the engine belt tension.
Every 100 hours
• Change the engine oil filter.
• Check the traction belt tension.
• Change the engine oil.
Every 200 hours
• Service the air filter.
• Replace the fuel filter/water separator.
• Replace the hydraulic filter.
• Torque the wheel lug nuts.
Every 400 hours
• Replace the hydraulic fluid.
• Check the battery level and connections.
• Inspect the traction linkage movement.
• Check the engine RPM (idle and full throttle).
Every 1000 hours or 2
years, whichever occurs
first
• Replace moving hoses.
• Replace the safety switches.
• Flush the cooling system and replace the hoses.
• Replace the thermostat.
• Drain and flush the fuel tank.
• Drain and flush the hydraulic tank.
Important Refer to your engine operator’s manual for additional maintenance procedures.