Service Manual

Rev. E
Reelmaster 5200-D/5400-DSteering and Brakes Page 7 - 4
Specifications
Item Specification
Front wheel lug nut torque 45 to 55 ft-lbs (61 to 75 Nm)
Rear wheel lug nut torque 30 to 35 ft-lbs. (41 to 47 Nm)
Steering cylinder bolt torque 130 to 150 ft-lbs. (176 to 203 Nm)
Rear wheel toe-in 0.000 to 0.125 in. (0.0 to 3.0 mm)
Tire pressure (front and rear) 10 to 15 psi. (0.69 to 1.03 Bar)
Brake pedal free travel 0.5 to 1.0 in. (6.0 to 25.0 mm)
Special Tools
Order special tools from your Toro Distributor.
Steering Valve Service Fixture
To avoid distorting or damaging the steering valve when
repairing, do not clamp it directly into a vise. Fabricate
a service fixture (Fig. 6) and use it as instructed (See
Steering Valve Service in this section of this manual).
Figure 6