Operator's Manual

35
Daily Maintenance Checklist
Duplicate this page for routine use.
For the week of:
Maintenance Check Item
Mon. Tues. Wed. Thurs. Fri. Sat. Sun.
Safety Interlock Operation
Brake Operation
Engine Oil & Fuel Level
Cooling System Fluid Level
Drain Water/Fuel Separator
Air Filter Restriction Indicator
Radiator and Screen for Debris
Unusual Engine Noises
1
Unusual Operating Noises
Transmission Oil Level
Hydraulic System Oil Level
Hydraulic Filter Indicator
2
Hydraulic Hoses for Damage
Fluid Leaks
Tire Pressure
Instrument Operations
Reel–to–Bedknife Adjustment
Height–of–Cut Adjustment
Lubricate All Grease Fittings
3
Touch–up Damaged Paint
1
Check glow plugs and injector nozzles, if excess smoke or rough running is noted.
2
Check with engine running and oil at operating temperature.
3
Immediately after every washing, regardless of the interval listed.
Servicing the Air Cleaner
Before servicing or making adjustments to the
machine, stop the engine and remove the key from
the switch. Lower the cutting units to the ground.
Warning
1. Check air cleaner body for damage which could
possibly cause an air leak. Replace a damaged air
cleaner body.
2. Service the air cleaner filters when ever air cleaner
indicator (Fig. 45) shows red or every 400 hours (more
frequently in extreme dusty or dirty conditions). Do not
over service air filter.
3. Be sure cover is sealing around air cleaner body.
Servicing the Precleaner Bowl
Normally, inspect precleaner bowl daily. When conditions
are extremely dusty and dirty, inspect more frequently. Do
not let dust or debris build up above level marks on
precleaner bowl.