Service Manual

Hydraulic

System

Reelmaster 5500-D Hydraulic System (Rev. C)Page 4 - 87

2. Install front center lift cylinder (Fig. 97).

A. Insert cylinder pin through the carrier frame and

cylinder clevis. Secure self tapping screw to the cyl-

inder pin and carrier frame.

B. Insert cylinder pin with attached retaining ring

and thrust washer through the lift arm and cylinder

clevis. Secure thrust washer and retaining ring to the

cylinder rod end pin.

3. Install front right or left lift cylinder.

A. Insert cylinder pin through carrier frame and cyl-

inder clevis. Secure self tapping screw to cylinder pin

and carrier frame (Fig. 96).

B. Insert cylinder pin with attached retaining ring

and thrust washer through the lift arm and cylinder

clevis. Secure thrust washer and retaining ring to the

cylinder rod end pin (Fig. 96 and 95).

1. Retaining ring

2. Cylinder cap end pin

3. Frame

4. Retaining ring

5. Cylinder rod end pin

6. Thrust washer

7. Lift arm

Figure 98

1 2

4 5 6