Service Manual

Reelmaster 5500-DHydraulic System (Rev. C) Page 4 - 2
Specifications
Item Specification
Hydraulic Transmission Sauer-Sundstrand M25, U-type
System Relief Pressure (Forward) 3625 PSI (249.9 bar)
System Relief Pressure (Reverse) 2755 PSI (190 bar)
Charge Pressure 150 PSI (10.3 bar)
Cooler By-pass Pressure 70 PSI (4.8 bar)
Filter By-pass Pressure 70 PSI (4.8 bar)
Oil Filter Screw-on type
In-line Strainer 260 micron, 8 GPM (30.3 LPM)
Gear Pump 3 section, positive displacement gear type pumps
Maximum Operating Pressure 3000 PSI (207 bar)
Steering Relief Pressure 1450 PSI (100 bar)
Hydraulic Manifold (Reel)
Front Reels Circuit Relief Pressure (R1) 3000 PSI (207 bar)
Rear Reels Circuit Relief Pressure (R2) 2000 PSI (138 bar)
Reel Motors Gear motor
Maximum Operating Pressure 3000 PSI (207 bar)
Hydraulic Filter (Reels, Lift, and Steering Circuits) Spin-on cartridge type with 50 psi internal bypass
Hydraulic Reservoir (Reels, Lift, and Steering Circuits) 8.5 gal. U.S. (32.2 L)
Hydraulic Oil See Check Hydraulic System Fluid in General Information section
Hydraulic Reservoir in Differential Housing (Transmission) 5.0 qts. U.S. (4.7 L)