Operator's Manual
AdjustingtheRearGrassShield
Note:Whenoperatinginturfconditionswherethere
isexcessivedebrisorthatch,openthereardischarge
shieldtohelpallowthedebristodischargefromthe
reel.
1.Loosentheboltsonthepivotofthegrassshield
(Figure10).
g028403
Figure10
1.Reargrassshield2.Pivotbolt
2.Rotatethegrassshieldtothedesiredsetting,
andtightenthebolts(Figure10).
CAUTION
Donotopentherearshieldsothatitis
higherthanleveltoground.
Throwndebriscouldcausepersonal
injury.
AdjustingtheRollerScrapers
1.Loosentheangenutsthatsecuretheroller
scrapers(Figure11).
g028404
Figure11
1.Frontrollerscraper3.Transportroller
2.Rearrollerscraper
4.Cotterpin
2.Movethescraperrodsinorouttoattain0.0to
0.75mm(0.0to0.03inch)clearancebetween
thescraperandroller.
3.Ensurethatthescraperrodisparalleltothe
rollerandtothelevelsurface.
4.Tightentheangenutstolocktheadjustment.
AdjustingtheTransportRollers
Important:Beforetheverticuttersareloweredto
theshopoororremovedfromthetractionunit,
lowerthetransportrollers(Figure11)toprotect
thebladesfromhardsurfacecontact.
1.Removethecotterpinthatsecuresthetransport
rollerbrackettothesideplatepin.
2.Positionthetransportrollerasfollows:
•Lowertherollerbracketbeforetheverticutter
isloweredtotheshopoor.
•Raisetherollerbracketaftertheverticutteris
raisedtotheoperatingposition.
3.Securethetransportrollerbrackettotheside
platepinwiththecotterpin.
4.Repeattheprocedureontheoppositeendof
theverticutter.
10