Installation Instructions
Table Of Contents
- .
- 1 Installing the Rear Lift Cylinder Limit Kit (Ordered Separately)
- 2 Installing the Basket Guides and Brackets
- 3 Installing the Cut-off Bar
- 4 Removing the 4 Grass Deflectors
- 5 Removing the Support Tube (For 5-inch Diameter Reels Only)
- 6 Mounting the Basket Assembly to the Cutting Unit
- 7 Adjusting the Basket Position
FormNo.3386-464RevB
GrassBasketKit
ForReelmaster
®
5010SeriesCuttingUnitswith5inand7inReels
ModelNo.03662
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Cylindercollar
4
Bolt4
Flangedlocknut8
Spacer
2
Stopbracket
2
1
Carriagebolt
4
Installtherearliftcylinderlimitkit
(orderedseparately).
Basketguide1
Basketbracket1
Rollpin1
Washer1
Left-handtorsion-spring(gold)
1
Right-handtorsion-spring(black)
1
Basketcollar1
Flatwasher(0.344x0.875)
2
Bolt(5/16x1–1/4inch)
1
Bolt(5/16x1/2inch)
1
2
Plasticwasher1
Installthebasketguidesandbrackets.
Cut-offbar
1
Bolt(1/4x1–3/4inches)
4
3
Locknut(1/4inch)
4
Installthecut-offbar.
4
Nopartsrequired
–
Removethe4grassdeectors.
5
Flangedlocknut2
Removethesupporttube(for5–inch
diameterreelsonly).
6
Basketassembly1
Mountthebasketassemblytothe
cuttingunit.
7
Nopartsrequired
–
Adjustthebasketposition.
Important:Togainadditionalclearancefortherearbasketswhenraisingthecuttingunits,installtheRearLift
CylinderLimitKit.
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3386-464*B