Operator's Manual

TractionPedal
Thetractionpedalcontrolstheforwardandreverse
operation(Figure19).Pressthetopofthepedalto
moveforwardandthebottomtomoverearward.The
groundspeeddependsonhowfaryoupressthe
pedal.Fornoload,maximumgroundspeed,setthe
enginespeedtotheFASTpositionandfullypressthe
pedal.
Tostopthemachine,reducefootpressureonthe
tractionpedalandallowittoreturntothecenter
position.
g003955
Figure19
1.Tractionpedal4.Brakepedal
2.Mow-speedlimiter5.Parkingbrake
3.Spacers
6.Tilt-steeringpedal
Mow-SpeedLimiter
Whenthemow-speedlimiterisippedup,itcontrols
themowspeedandallowsthecuttingunitstobe
engaged(Figure19).Eachspaceradjuststhe
mowingspeedby0.8km/h(0.5mph).Themore
spacersyouhaveonthetopofthebolt,theslowerthe
mowingspeed.T otransportthemachine,ipbackthe
mow-speedlimiterforthemaximumtransportspeed.
BrakePedal
Pressthebrakepedaltostopthemachine(Figure19).
ParkingBrake
Toengagetheparkingbrake,pushdownonthebrake
pedalandpressthetopforwardtolatch(Figure19).
Toreleasetheparkingbrake,pressthebrakepedal
untiltheparking-brakelatchretracts.
Tilt-SteeringPedal
Totiltthesteeringwheeltowardyou,pressthefoot
pedaldown,pullthesteeringtowertowardyouto
themostcomfortableposition,andreleasethepedal
(Figure19).
Engine-SpeedSwitch
Theengine-speedswitchhas2modestochangethe
enginespeed(Figure20).Bymomentarilytappingthe
switch,youcanchangetheenginespeedin100rpm
increments.Ifyouholdtheswitchdown,theengine
automaticallymovestoHighorLowidle,depending
onwhichendoftheswitchyoupress.
g021208
Figure20
1.Lowermow/raisecontrol
lever
4.Enable/disableswitch
2.Keyswitch5.Engine-speedswitch
3.InfoCenter
6.Headlightswitch
Enable/DisableSwitch
Usetheenable/disableswitchinconjunctionwiththe
lowermow/raisecontrollevertooperatethecutting
units(Figure20).
InfoCenter
TheInfoCenterLCDdisplayshowsinformationabout
yourmachine,suchastheoperatingstatus,various
diagnostics,andotherinformationaboutthemachine
(Figure20).
KeySwitch
Thekeyswitchhas3positions:OFF,ON/RUN,and
START(Figure20).
16