Operator's Manual

PushingorTowingthe
Machine
Inanemergency,youcanmovethemachine
byactuatingthebypassvalveinthevariable
displacementhydraulicpumpandpushingortowing
themachine.
Important:Donotpushortowthemachinefaster
than3to4.8km/h(2to3mph)becauseinternal
transmissiondamagemayoccur.Thebypass
valvemustbeopenwheneveryoupushortow
themachine.
1.Rotatethebypass-valvebolt1-1/2turnstoopen
andallowoiltobypassinternally(Figure68).
Note:Thebypassvalveislocatedontheleft
sideofthehydrostat.Bybypassingtheuid,you
canmovethemachineslowlywithoutdamaging
thetransmission.
g003995
Figure68
1.Bypass-valvebolt
2.Closethebypassvalvebeforestartingthe
engine.However,donotexceed7to11N∙m(5
to8ft-lb)torquetoclosethevalve.
Important:Runningtheenginewiththe
bypassvalveopencausesthetransmission
tooverheat.
HaulingtheMachine
•Usecarewhenloadingorunloadingthemachine
intooroutofatraileroratruck.
•Useafull-widthrampforloadingorunloadingthe
machineintooroutofatraileroratruck.
•Tiethemachinedownsecurely.Bothfrontand
rearstrapsshouldbedirecteddownandoutward
fromthemachine;refertoFigure69andFigure70.
–Front—theholeintherectangularpad,under
theaxletube,insideeachfronttire(Figure69)
g031851
Figure69
1.Fronttie-down
–Rear—eachsideofthemachineontherear
frame(Figure70)
g004555
Figure70
1.Reartie-down
43