Operator's Manual

PositioningtheTurfCompensatingSpring
andInstallingtheHoseGuide
CuttingUnits4
g375671
Figure6
1.Cuttingunit15.Cuttingunit5
2.Cuttingunit2
6.Reelmotor
3.Cuttingunit3
7.Weight
4.Cuttingunit4
1.Ifthehairpinisinstalledintherearholeofthe
compensation-springrod—removethehairpinand
insertitintheholenexttothebracket(Figure17).
g375689
Figure7
1.Hairpin
2.Removethe2angelocknuts(3/8inch)and2
carriagebolts(3/8x1-1/4inches)thatsecurethe
turf-compensatorbrackettothecutting-unitframe
(Figure18).
g375690
Figure8
1.Carriagebolt(3/8x1-1/4
inches)
3.Flangelocknut(3/8inch)
2.Turf-compensatorbracket
3.Removetheangelocknut(3/8inch)thatsecures
thecapscrewoftheturfcompensationspringto
therighttabofthecarrierframe,andremovethe
compensationspringfromthecuttingunit(Figure19).
Note:Donotremovetheangeserratednutfrom
thecapscrew.
g375691
Figure9
1.Capscrew3.Flangelocknut(3/8inch)
2.Righttab(Carrierframe)
4.Assemblethecapscrewoftheturfcompensation
springtotherighttabofthecarrierframe(Figure20)
withtheangelocknut(3/8inch).
12