Operator's Manual

g375690
Figure14
1.Carriagebolt(3/8x1-1/4
inches)
3.Flangelocknut(3/8inch)
2.Turf-compensatorbracket
3.Alignthestudsoftherighthoseguidewiththeholes
inthecutting-unitframeandtheturf-compensator
bracket(Figure15).
Note:Ensurethatthesupportloopofthehose
guidealignstowardthecenterlineofthemachine.
g375688
Figure15
1.Stud(hoseguide)3.Flangelocknut(3/8inch)
2.Turf-compensatorbracket
4.Inboard
4.Assemblethehoseguideandturf-compensator
brackettothecutting-unitframewiththe2ange
locknuts(3/8inch).
5.T orquethelocknutsto37to45N∙m(27to33ft-lb).
PositioningtheTurfCompensatingSpring
CuttingUnit2
g379514
Figure16
1.Cuttingunit15.Cuttingunit5
2.Cuttingunit2
6.Reelmotor
3.Cuttingunit3
7.Weight
4.Cuttingunit4
1.Ifthehairpinisinstalledintherearholeofthe
compensation-springrod—removethehairpinand
insertitintheholenexttothebracket(Figure17).
g375689
Figure17
1.Hairpin
2.Removethe2angelocknuts(3/8inch)and2
carriagebolts(3/8x1-1/4inches)thatsecurethe
turf-compensatorbrackettothecutting-unitframe
(Figure18).
14