Operator's Manual

g376339
Figure150
1.Filterhead
2.Chargelter
4.Removethelter.
5.Wipecleantheltermountingareaofthelterhead.
6.Applyathincoatofthespeciedhydraulicuidtothe
gasketofthenewchargelter.
7.Threadthelterontothelterheadbyhanduntilthe
gasketcontactsthemountingsurface,thenrotatethe
lteranadditional1/2turn.
8.Lowerandlatchtheseat;refertoLoweringtheSeat
(page53).
CheckingforLeaks
1.Starttheengineandrunitfor2minutestopurgeair
fromthehydraulicsystem.
2.Shutofftheengine,removethekey,andcheckfor
leaksatthereturnandchargelters.
Note:Repairallhydraulicleaks.
HydraulicFluidCapacity
30L(8USgallons);refertoHydraulicFluidSpecications
(page72)
ChangingtheHydraulicFluid
ServiceInterval:Every2,000hours—Ifyouareusing
therecommendedhydraulicuid,
changethehydraulicuid.
Every800hours—Ifyouarenotusingthe
recommendedhydraulicuidorhaveeverlled
thereservoirwithanalternativeuid,changethe
hydraulicuid.
Iftheuidbecomescontaminated,contactyourToro
Distributorbecausethesystemmustbeushed.
Contaminateduidlooksmilkyorblackwhencompared
tocleanuid.
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page52).
2.Placealargedrainpanunderthestraighttting
(Figure151)ofthehydraulictank;refertoHydraulic
FluidCapacity(page74).
g377036
Figure151
1.Straighttting(hydraulic
tank)
3.Returnlter
2.Hose(casedrain)
3.Disconnectthecase-drainhosefromthestraight
tting,andallowthetanktodrain.
4.Whenhydraulicuidstopsdrainingfromthetank,
installthedrainhose.
5.Fillthetankwiththespeciedhydraulicuid;refer
toHydraulicFluidSpecications(page72)and
HydraulicFluidCapacity(page74).
Important:Useonlythehydraulicuids
specied.Otheruidscouldcausesystem
damage.
6.Installthetankcap.
7.Starttheengine,anduseallthehydrauliccontrolsto
distributehydraulicuidthroughoutthesystem.
8.Checkforhydraulic-uidleaks;refertoCheckingfor
Leaks(page74).
9.Checkthelevel;refertoCheckingtheHydraulic-Fluid
Level(page72)
74