Operator's Manual

HaulingtheMachine
•Usefull-widthrampsforloadingthemachineontoa
trailerortruck.
•Tiethemachinedownsecurely.
Tie-DownPointLocations
g375766
Figure94
1.Frontofthemachine
3.Framehoops
2.Jackbrackets(frontaxle
tube)
4.Backofthemachine
•Front—theholeinthejackbracketsofthefront-axle
tube(Figure94).
•Rear—theframehoopsateachsideofthemachine.
PushingorTowingtheMachine
Inanemergency,youcanmovethemachinebyactuating
thebypassvalveinthevariabledisplacementhydraulic
pumpandpushingortowingthemachine.
Important:Donotpushortowthemachinefaster
than3to4.8km/h(2to3mph)becauseinternal
transmissiondamagemayoccur.Thebypassvalve
mustbeopenwheneveryoupushortowthemachine.
1.Engagetheparkingbrake,shutofftheengine,and
removethekey.
2.Openthehood;refertoOpeningtheHood(page52).
3.Atthevariable-displacementpump,rotatethe
bypass-valvebolt1-1/2turnstoopenandallowoilto
bypassinternally(Figure95).
Note:Thebypassvalveislocatedattheleftsideof
thepump.Bybypassingtheuid,youcanmovethe
machineslowlywithoutdamagingthetransmission.
g003995
Figure95
1.Bypass-valvebolt
4.Closeandlatchthehood.
5.Pushortowthemachine.
6.Beforestartingtheengine,closethebypassvalve.
Donotexceed7to11N∙m(5to8ft-lb)torqueto
closethevalve.
Important:Runningtheenginewiththebypass
valveopencausesthetransmissiontooverheat.
48