Operator's Manual

PushingorTowingthe
Machine
Inanemergency,youcanmovethemachine
byactuatingthebypassvalveinthevariable
displacementhydraulicpumpandpushingortowing
themachine.
Important:Donotpushortowthemachinefaster
than3to4.8km/h(2to3mph)becauseinternal
transmissiondamagemayoccur.Thebypass
valvemustbeopenwheneveryoupushortow
themachine.
1.Rotatethebypass-valvebolt1-1/2turnstoopen
andallowoiltobypassinternally(Figure55).
Note:Thebypassvalveislocatedontheleft
sideofthehydrostat.Bybypassingtheuid,you
canmovethemachineslowlywithoutdamaging
thetransmission.
g003995
Figure55
1.Bypass-valvebolt
2.Closethebypassvalvebeforestartingthe
engine.However,donotexceed7to11N∙m(5
to8ft-lb)torquetoclosethevalve.
Important:Runningtheenginewiththe
bypassvalveopencausesthetransmission
tooverheat.
HaulingtheMachine
•Usecarewhenloadingorunloadingthemachine
intooroutofatraileroratruck.
•Useafull-widthrampforloadingorunloadingthe
machineintooroutofatraileroratruck.
•Tiethemachinedownsecurelyusingstraps,
chains,cable,orropes.Bothfrontandrearstraps
shouldbedirecteddownandoutwardfromthe
machine;refertoFigure56andFigure57.
–Front—theholeintherectangularpad,under
theaxletube,insideeachfronttire(Figure56)
G031851
g031851
Figure56
1.Fronttie-down
–Rear—eachsideofthemachineontherear
frame(Figure57)
g004555
Figure57
1.Reartie-down
41