Service Bulletin

Toro Customer Bulletin LR #18-03 Page 14 of 14
2018 Universal Groomer Updates Reelmaster July 25, 2018
6. For proper safety, prevent the reel from rotating by blocking the cutting reel with a piece of
wood near one of the reel spiders. Slide shaft drive removal tool (137-0920) over the shaft
so the flats on the input shaft and the flats on the socket align. Using 1½ inch box end
wrench, remove the groomer drive shaft from the cutting unit. (Figure 8)
Important: With gear box installed on right-hand side of cutting unit, turn groomer
drive counter-clockwise to remove drive-box shaft from cutting unit.
Important: With gear box installed on left-hand side of cutting unit, turn groomer
drive clockwise (left-hand thread) to remove drive-box shaft from cutting unit.
Figure 8
Tool-Adapter, Wrench, 137-0921 holds the driveshaft assembly when installing and torqueing
adapter. (Figure 9)
Figure 9