Operator's Manual

Figure9
1.Turfcompensationspring3.Springtube
2.Rodbracket
B.Removetheangenutsecuringthespringtube
bolttothecarrierframetab(Figure9)Remove
theassembly.
C.Mountthespringtubebolttotheoppositetab
onthecarrierframeandsecurewiththeange
nut.Theboltheadistobepositionedtothe
outersideofthetabasshownin
Figure10.
Figure10
1.Oppositecarrierframetab
2.Rodbracket
D.Mounttherodbrackettothecuttingunittabs
withthecarriageboltsandnuts(Figure10).Also,
onthe#4(leftfront)cuttingunit,mounttheleft
handhoseguidetothefrontofthecuttingunit
tabswhenreinstallingtherodbracket(
Figure12).
Figure11
Note:Onthe#5(rightfront)cuttingunit,use
therodbracketmountingnutstoinstalltheright
handhoseguidetothefrontofthecuttingunit
tabs.
Figure12
1.Hoseguide(Lefthand
shown)
3.Nuts
2.Rodbracket
Note:Wheninstallingorremovingthecutting
units,makesurethehairpincotterisinstalled
inthespringrodholenexttotherodbracket.
Otherwise,thehairpincottermustbeinstalledin
theholeintheendoftherod.
6.On27inchcuttingunitsonly,increasethesteering
ontherearcuttingunitsbyremovingthe(2)pivot
spacers,hexsocketscrewsandangelocknuts
(
Figure13)fromtherear(#2and#3)cuttingunit
carrierframes(Figure11).
Note:32inchcuttingunitsarenotequippedwith
pivotspacers.
15