Operator's Manual

Figure81
1.Frontbacklaplever2.Rearbacklaplever
8.Ifthereelsstallorbecomeerraticwhilebacklapping,
increasethethrottlespeeduntilthereelstabilizes.
9.Tomakeanadjustmenttothecuttingunitswhile
backlapping,turnthereelsoffbypressingtherear
oftheliftswitch;movethePTOswitchtotheOFF
position,andstoptheengine.Aftercompleting
adjustments,repeatstepsthrough
8.
10.Repeattheprocedureforallcuttingunitsyouwant
tobacklap.
11.Whennished,returnthebacklapleverstothe
Mowposition,lowerthehood,andwashalllapping
compoundoffofthecuttingunits.Adjustcutting
unitreeltobedknifeasneeded.Movethecuttingunit
reelspeedcontrolstothedesiredmowingposition.
Important:Ifthebacklapswitchisnotreturned
totheOffpositionafterbacklapping,thecutting
unitswillnotraiseorfunctionproperly.
Note:Additionalinstructionsandprocedureson
backlappingareavailableintheTOROSharpening
Reel&RotaryMowersManualFormNo.80–300SL.
Note:Forabettercuttingedge,runaleacrossthe
frontfaceofthebedknifeafterlapping.Thiswill
removeanyburrsorroughedgesthatmayhavebuilt
uponthecuttingedge.
Cleaning
ServicingtheSparkArrestor
Mufer
ServiceInterval:Every200hours
Every200hoursoperation,clearthemuferofcarbon
buildup.
1.Removethepipeplugfromtheclean-outportatthe
lowersideofthemufer.
CAUTION
Themufermaybehotandcouldcauseinjury.
Becarefulwhileworkingaroundthemufer.
2.Starttheengine.Plugthenormalmuferexitwitha
blockofwoodormetalplatesothattheexhaustow
willbeforcedoutoftheclean-outport.Continueto
blocktheexituntilcarbondepositsceasecoming
outoftheport.
CAUTION
Donotstandinlinewiththeclean-outport.
Alwayswearsafetyglasses.
3.Stoptheengineandreplacethepipeplug.
53