Installation Instructions

RestrainingtheReelforInstalling
ThreadedInserts
1.Insertalong-handledprybar(recommended3/8
x12incheswithascrewdriverhandle)through
thefrontofthecuttingreel,closesttothesideof
thecuttingunitthatyouwillbetorquing(Figure
32).
2.Placetheprybaragainsttheweldsideofthe
internalcuttingreelreinforcement(Figure32).
Note:Theprybarshouldcontactabladeatthe
front,thereelshaft,andabladeatthebackof
thebackofthereel,lockingitinplace.
Important:Donotcontactthecuttingedge
ofanybladeswiththeprybar;thismay
damagethecuttingedgeand/orcauseahigh
blade.
Important:Theinsertontheleftsideof
thecuttingunithasleft-handthreads.The
insertontherightsideofthecuttingunithas
right-handthreads.
g280384
Figure32
1.Threadedinsertfor
installation
3.Weldsideofsupportplate
2.Reelshaft
4.Prybar
3.Restthehandleoftheprybaragainsttheroller
4.Pertheinsert’sinstallationinstructionsand
torquerequirements,completetheinstallationof
thethreadedinsertwhileensuringthatthepry
barstaysinplace,thenremovetheprybar.
20