Operator's Manual

CheckingtheHydraulicFluid
ServiceInterval:Beforeeachuseordaily
Themachinesreservoirislledatthefactorywith
approximately32liters(8.5U.S.gallons)ofhighquality
hydraulicuid.Checkthelevelofthehydraulicuid
beforetheengineisrststartedanddailythereafter.The
recommendedreplacementuidisasfollows:
ToroPremiumAllSeasonHydraulicFluid(Availablein
18.9liter(5gallon)pailsor208liter(55gallondrums).See
partscatalogorT orodistributorforpartnumbers.)
Alternateuids:IftheTorouidisnotavailable,other
uidsmaybeusedprovidedtheymeetallthefollowing
materialpropertiesandindustryspecications.Wedonot
recommendtheuseofsyntheticuid.Consultwithyour
lubricantdistributortoidentifyasatisfactoryproductNote:
Torowillnotassumeresponsibilityfordamagecausedby
impropersubstitutions,souseonlyproductsfromreputable
manufacturerswhowillstandbehindtheirrecommendation.
HighViscosityIndex/LowPourPointAnti-wearHydraulic
Fluid,ISOVG46
MaterialProperties:
Viscosity,ASTMD445cSt@40°C44to48
cSt@100°C7.9to8.5
ViscosityIndexASTM
D2270
140to160
PourPoint,ASTMD97-34°Fto-49°F
IndustrySpecications:
VickersI-286-S(QualityLevel),VickersM-2950-S
(QualityLevel),DenisonHF-0
Important:TheISOVG46Multigradeuidhasbeen
foundtoofferoptimalperformanceinawiderangeof
temperatureconditions.Foroperationinconsistently
highambienttemperatures,65°F(18°C)to120°F
(49°C),ISOVG68hydraulicuidmayofferimproved
performance.
PremiumBiodegradableHydraulicFluid-MobilEAL
EnviroSyn46H
Important:MobilEALEnviroSyn46Histheonly
syntheticbiodegradableuidapprovedbyToro.This
uidiscompatiblewiththeelastomersusedinToro
hydraulicsystemsandissuitableforawide-range
oftemperatureconditions.Thisuidiscompatible
withconventionalmineraloils,butformaximum
biodegradabilityandperformancethehydraulicsystem
shouldbethoroughlyushedofconventionaluid.The
oilisavailablein19liters(5gallon)containersor55
gallondrumsfromyourMobilDistributor.
Important:Manyhydraulicuidsarealmostcolorless,
makingitdifculttospotleaks.Areddyeadditive
forthehydraulicsystemoilisavailablein20ml(2/3
oz.)bottles.Onebottleissufcientfor15-22liters(4-6
gallons)ofhydraulicoil.Orderpartno.44-2500from
yourauthorizedTorodistributor.
1.Positionmachineonalevelsurface,lowerthecutting
unitsandstoptheengine.
2.Cleanareaaroundllerneckandcapofhydraulictank
(
Figure34).Removecapfromllerneck.
1
G019458
Figure34
1.Hydraulictankcap
3.Removedipstickfromllerneckandwipeitwitha
cleanrag.Insertdipstickintollerneck;thenremoveit
andchecklevelofuid.Fluidlevelshouldbewithin6
mm(1/4inch)ofmarkondipstick.
4.Iflevelislow,addappropriateuidtoraiselevelto
fullmark.
5.Installdipstickandcapontollerneck.
CheckingtheTirePressure
ServiceInterval:Beforeeachuseordaily
Thetiresareover-inatedforshipping.Therefore,release
someoftheairtoreducethepressure.Correctairpressurein
thefrontandreartiresis103–138kPa(15–20psi).
Important:Maintainevenpressureinalltirestoensure
agoodquality-of-cutandpropermachineperformance.
Donotunderinate.
CheckingtheReeltoBedknife
Contact
ServiceInterval:Beforeeachuseordaily
Eachdaybeforeoperating,checkreeltobedknifecontact,
regardlessifqualityofcuthadpreviouslybeenacceptable.
Theremustbelightcontactacrossthefulllengthofthereel
andbedknife(refertoAdjustingReeltoBedknifeinCutting
UnitOperator'sManual).
StartingandStopping
1.Sitontheseat,keepfootofftractionpedal.Ensure
parkingbrakeisengaged,tractionpedalisinNeutral,
throttleisinSlowpositionandtheEnable/Disable
switchisintheDisableposition.
29