Service Manual

Reelmaster 6500-D/6700-DHydraulic System Page 4 - 42

TEST NO. 6: Reel Drive Motor Cross-Over Relief Pressure

Use a tee fitting to install

pressure gauge in inlet

line of motor being tested.

NOTE: Inlet is front hose.

High Pressure

Low Pressure

Flow

Reel Manifold Block

Figure 19

Note: One way to find a bad reel motor is to have

another person observe the machine while mowing in

dense turf. A bad motor will run slower, produce fewer

clippings, and may cause marcelling (or a washboard

appearance) on the turf.

1. Make sure hydraulic oil is at normal operating temper-

ature before doing test.

CAUTION

Keep away from reels during tests to prevent

personal injury from rotating blades. Do not

stand in front of the machine.