Operator's Manual

g020164
Figure14
1.Turfcompensationspring3.Springrod
2.Hairpincotter4.Hexnuts
2.Tightenthehexnutsonthefrontendofthe
springroduntilthecompressedlengthofthe
spring(Figure14)is12.7cm(5inches)for
5-inchcuttingunitsand15.8cm(6-1/4inches)
for7-inchcuttingunits.
Note:Whenoperatingonroughterrain,
decreasethespringlengthby2.5cm(1/2inch).
Groundfollowingwillbeslightlydecreased.
3
InstallingtheCEDecals
Partsneededforthisprocedure:
1
Warningdecal121-7928(machinemodel03910)
1
Warningdecal138-1186(machinemodels03820and
03821)
1
CEdecal
1Productionyeardecal
Procedure
OnmachinesrequiringCEcompliance,applythe
productionyeardecal(PartNo.133-5615)nearthe
serialplate,theCEdecal(PartNo.93-7252)near
thehoodlock,andtheCEwarningdecal(PartNo.
121-7928formachinemodel03910andPartNo.
138-1186formachinemodels03820and03821)over
thestandardwarningdecal(PartNo.120-1683).
4
InstallingtheHoodLatch
(CEOnly)
Partsneededforthisprocedure:
1Lockbracket
2Rivet
1Washer
1
Screw(1/4x2inches)
1
Locknut(1/4inch)
Procedure
1.Unhookthehoodlatchfromthehood-latch
bracket.
2.Removethe2rivetssecuringthehood-latch
brackettothehood(Figure15)andremovethe
hood-latchbracketfromthehood.
g012628
Figure15
1.Hood-latchbracket2.Rivets
3.Whilealigningthemountingholes,positionthe
CElockbracketandthehood-latchbracketonto
thehood.
Note:Thelockbracketmustbeagainstthe
hood(Figure16).Donotremovetheboltand
nutfromthelock-bracketarm.
17