Operator's Manual

g034351
Figure83
1.Hydrauliclter
3.Lubricatethenewltergasketandllthelter
withhydraulicuid.
4.Ensurethattheltermountingareaisclean.
Screwthelteronuntilthegasketcontactsthe
mountingplate;thentightenthelter1/2turn.
5.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.Shutofftheengine
andcheckforleaks.
CuttingUnitSystem
Maintenance
BladeSafety
Awornordamagedbladeorbedknifecanbreak,and
apiececouldbethrowntowardyouorbystanders,
resultinginseriouspersonalinjuryordeath.
•Inspectthebladesandbedknivesperiodicallyfor
excessivewearordamage.
•Usecarewhencheckingtheblades.Weargloves
andusecautionwhenservicingthem.Only
replaceorbacklapthebladesandbedknives;
neverstraightenorweldthem.
•Onmachineswithmultiplecuttingunits,takecare
whenrotatingacuttingunit;itcancausethereels
intheothercuttingunitstorotate.
Checkingthe
Reel-to-BedknifeContact
ServiceInterval:Beforeeachuseordaily
Eachdaybeforeoperating,checkthereel-to-bedknife
contact,regardlessofwhetherthequalityofcuthad
previouslybeenacceptable.Theremustbelight
contactacrossthefulllengthofthereelandthe
bedknife(refertoAdjustingtheReeltoBedknifeinthe
cuttingunitOperator'sManual).
56