Operator's Manual

g004552
Figure80
1.Gaugebar4.Holesusedforsetting
groomerHOG
2.Heightadjustingscrew5.Holenotused
3.Nut
BacklappingtheCutting
Units
WARNING
Contactwiththecuttingunitsorothermoving
partscanresultinpersonalinjury.
•Keepyourngers,hands,andclothing
awayfromthecuttingunitsandother
movingparts.
•Neverattempttoturnthecuttingunitsby
handorfootwhiletheengineisrunning.
Note:Whenbacklapping,allthecuttingunitsoperate
together.
1.Parkthemachineonalevelsurface,lowerthe
cuttingunits,engagetheparkingbrake,shutoff
theengine,andmovetheEnable/Disableswitch
totheDISABLEposition.
2.Raisetheoorpaneltoexposethecontrols.
3.Maketheinitialreel-to-bedknifeadjustments
appropriateforbacklapping;refertothecutting
unitOperator'sManual.
4.Starttheengineandallowittorunatlowidle
speed.
DANGER
Changingtheenginespeedwhile
backlappingmaycausethecuttingunits
tostall.
•Neverchangetheenginespeedwhile
backlapping
•Backlaponlyatidleenginespeed.
5.Setthereelspeedcontroltoposition1(Figure
81).
g020248
Figure81
1.Backlaplever2.Reelspeedcontrolknob
6.MovethebacklaplevertotheR(backlap)
position(Figure81).
DANGER
Contactingthecuttingunitswhenthey
aremovingcouldcausepersonalinjury.
Toavoidpersonalinjury,becertainthat
youareclearofthecuttingunitsbefore
proceeding.
7.WiththeMow/TransportleverintheMOW
position,movetheEnable/Disableswitchto
theENABLEposition.MovetheLowerMow/Lift
controlforwardtostartthebacklappingoperation
onthedesignatedcuttingunits.
8.Applylappingcompoundwithalong-handle
brush.Neveruseashort-handledbrush.
9.Ifthecuttingunitsstallorbecomeerraticwhile
backlapping,selectahigherreelspeedsetting
untilthespeedstabilizes,thenreturnthereel
speedtosetting1ortoyourdesiredspeed.
53