Operator's Manual

9.Forthefrontcuttingunits,slideacuttingunit
undertheliftarmwhileinsertingthecarrierframe
shaftupintothelift-armpivotyoke(Figure10).
g020321
Figure10
1.Liftarm3.Lift-armpivotyoke
2.Carrierframeshaft
10.Usethefollowingprocedureontherearcutting
unitswhentheheightofcutisabove1.2cm
(3/4inch).
A.Removethelynchpinandwashersecuring
thelift-armpivotshafttotheliftarmand
slidethelift-armpivotshaftoutofthelift
arm(Figure11).
g003979
Figure11
1.Lift-armshaftlynchpinandwasher
B.Insertthelift-armyokeontothecarrier
frameshaft(Figure10).
C.Insertthelift-armshaftintotheliftarmand
secureitwiththewasherandlynchpin
(Figure11).
11.Insertthecapoverthecarrierframeshaftand
lift-armyoke.
12.Securethecapandthecarrierframeshafttothe
lift-armyokewiththesnapperpin.
Note:Usetheslotifasteeringcuttingunitis
desiredorusetheholeifthecuttingunitistobe
lockedinposition(Figure9).
13.Securethelift-armchaintothechainbracket
withthesnapperpin(Figure12).
Note:Usethenumberofchainlinksspecied
inthecuttingunitOperator'sManual.
g003948
Figure12
1.Lift-armchain3.Snapperpin
2.Chainbracket
14.Coatthesplineshaftofthereelmotorwithclean
grease.
15.Oilthereel-motorO-ringandinstallitontothe
motorange.
16.Installthemotorbyrotatingitclockwisesothat
themotorangesclearthelocknuts(Figure
13).Rotatethemotorcounterclockwiseuntilthe
angesencirclethenuts,thentightenthenuts.
Important:Makesurethatthereelmotor
hosesarenottwisted,kinked,oratriskof
beingpinched.
g020322
Figure13
1.Reel-drivemotor2.Mountingnuts
16