Operator's Manual

g034351
Figure79
1.Hydrauliclter
3.Lubricatethenewltergasketandllthelter
withhydraulicuid.
4.Ensurethattheltermountingareaisclean.
Screwthelteronuntilthegasketcontactsthe
mountingplate;thentightenthelter1/2turn.
5.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.Shutofftheengine
andcheckforleaks.
ChangingtheHydraulic
Fluid
ServiceInterval:Every400hours
Iftheuidbecomescontaminated,contactyour
localTorodistributorbecausethesystemmustbe
ushed.Contaminateduidlooksmilkyorblackwhen
comparedtocleanoil.
1.Parkthemachineonalevelsurface,lowerthe
cuttingunits,engagetheparkingbrake,shutoff
theengine,andremovethekeyfromtheignition
switch.
2.Disconnectthelargehydraulichose(Figure80)
fromthereservoirandletthehydraulicuidow
intoadrainpan.
g020253
Figure80
1.Hydraulichose
3.Installthehydraulichosewhenhydraulicuid
stopsdraining.
4.Fillthereservoir(Figure81)withapproximately
13.2L(3.5USgallons)ofhydraulicuid;referto
CheckingtheHydraulicSystem(page23).
Important:Useonlythehydraulicuids
specied.Otheruidscouldcausesystem
damage.
g008886
Figure81
1.Hydraulicllcap
5.Installthereservoircap.Starttheengineand
useallofthehydrauliccontrolstodistributethe
hydraulicuidthroughoutthesystem.
6.Checkforleaks;thenshutofftheengine.
7.Checktheuidlevelandaddenoughtoraise
theleveltoFullmarkonthedipstick.
Important:Donotoverllthereservoir.
52