Operator's Manual

Note:Determinetheleftandrightsidesofthemachine
fromthenormaloperatingposition.
1
InstallingtheCuttingUnitto
theTractionUnit
Partsneededforthisprocedure:
2Bolt,M10x25mm
1.Placethemoweronitsdrumsonalevelsurface.
2.Lowerkickstand.Inserta1/4"dia.pinorequivalent
intoframeholeabovekickstandmountingbolt
(Figure3).
Figure3
1.1/4"Pin
3.Kickstand
2.Handle
3.Pushthecuttingunitunderthetractionunitand
thentothelefttoengagethetransmissioncoupling
(Figure4).
Figure4
1.Transmissioncoupling
4.Rotatethetractionunitframe(Figure5)forward
untilitengagesthecuttingunitpivotarms.
5.Securethetractionunitframetothecuttingunit
pivotarmswith(2)M10x25mmbolts(Figure5)
Figure5
1.Cuttingunitpivotarms
3.Bolts
2.Tractionunitframe
Note:Whentighteningthepivotarmmounting
fasteners,useanadjustableendwrenchtoholdthe
pivotarmparalleltothesideplate(Figure6)
10