Service Bulletin

Customer Service Bulletin

Commercial Business Group

Greensmaster

3150

Date: August 5, 2003

Model/Serial Range: Model Number:

Serial Numbers:

04357 230000801-230001083

Subject: No power to lights when installing Light Kit (105-8336).

There will be no power supply to the lights when installing Light Kit (105-8336) onto the

units identified in this bulletin. To provide a power supply, a jumper connector from Kit

(106-4153) must be added. Instructions for performing this modification are included

with this document.

PAGE 1
Customer Service Bulletin Commercial Business Group Greensmaster® 3150 Model/Serial Range: Model Number: 04357 Subject: Date: August 5, 2003 Serial Numbers: 230000801-230001083 No power to lights when installing Light Kit (105-8336). There will be no power supply to the lights when installing Light Kit (105-8336) onto the units identified in this bulletin. To provide a power supply, a jumper connector from Kit (106-4153) must be added.
PAGE 2
Wiring Modification for Installing Light Kit (105-8336) Greensmaster 3150 Model 04357 230000801-230001083 The purpose of this procedure is to add a jumper terminal between the 20 Amp fuse location and the empty fuse location of the Fuse Block where “Missing Terminal” is identified. For clarification, the Fuse Block is shown removed from the machine. 1. Remove the 20 Amp fuse. 2.
PAGE 3
6. Solder the crimped bare wire strands of the red wire to the second terminal as shown. Solder here Fig 5 7. Insert terminal into Fuse Block until it locks in position as shown. Insert Terminal Fig 6 8. Reinstall 20 Amp fuse and unit is now ready for installation of Light Kit (105-8336).