Service Bulletin

Form Date 1/1/98

GREENS REELS #08-12

Greensmaster

3200-D

Revised January 14, 1999

Remove/destroy all previous versions

HIGH CASE PRESSURE LEAK

PRODUCT: Greensmaster 3200-D

UNITS AFFECTED: MODEL NUMBER: SERIAL NUMBERS:

04381 80333-80437

Exempt Unit List:

80333 - 80341, 80343 - 80367, 80369 - 80375, 80377 - 80379, 80381,

80382, 80384, 80387, 80396, 80409, 80428, 80435, and 80436.

SUBJECT: Leaking Hydrostat Seal caused by high case pressure.

SITUATION: The hydrostat and gear pump assembly may leak due to excessive case

pressure caused by a shipping plug mistakenly left in the gear pump

assembly during production. If the shipping plug is left in place, an

increase in hydrostatic case pressure will occur. This condition may cause

a leak between the gear pump and hydrostat, or at the trunion shaft seal.

CORRECTION: All units listed above need to have the gear pump section removed and

inspected for the presence of the shipping plug. If this plug is found it

needs to be removed and discarded to restore proper operation. Refer to

the illustration on the back of this bulletin for details.

PARTS: None required.

WARRANTY: ¨Info Only ¨Normal Warranty þFactory Program ¨Special

Warranty Claiming Information:

Labor Operation: 037-BH-01 Gear Pump Inspection/Repair 0.4 hr

Damage Code: 80

DISTRIBUTION: Distributor only. Do not duplicate or distribute further.

PAGE 1
Form Date 1/1/98 GREENS REELS #08-12 Greensmaster® 3200-D Revised January 14, 1999 Remove/destroy all previous versions HIGH CASE PRESSURE LEAK PRODUCT: Greensmaster 3200-D UNITS AFFECTED: MODEL NUMBER: 04381 SERIAL NUMBERS: 80333-80437 Exempt Unit List: 80333 - 80341, 80343 - 80367, 80369 - 80375, 80377 - 80379, 80381, 80382, 80384, 80387, 80396, 80409, 80428, 80435, and 80436. SUBJECT: Leaking Hydrostat Seal caused by high case pressure.
PAGE 2
HYDROSTAT INSPECTION AND PLUG REMOVAL For Greensmaster® 3200-D 1) Clamp off supply hose to prevent oil loss during repair. Loosen bottom fitting to ease access. 3) Shipping Plug is Orange 2) Remove Gear Pump from Hydrostat. Plug will be located in Gear Pump Shaft Flange. in color and is in this location. Remove and discard. All units listed on the front of this bulletin need to have the gear pump section removed and inspected for the presence of the shipping plug indicated above (step #3).