Operator's Manual

Note:Note:MountingfastenersfortheGreensmaster
3250-Dcuttingunitsareincludedwiththecuttingunits.
1
InstallingtheRearWheel
Partsneededforthisprocedure:
1Wheelhub
4Wheelnuts
1Wheel
1Wheelbolt
1Locknut
2
Spacers
Procedure
1.Mountthewheelhubtotherearwheelrimwith4
mountingnuts(Figure3).Torquethenutsto70–90
ft.-lb.
2.Removethewheelboltandlocknutfromthewheel
mountingholesintherearcastorfork(Figure3).
3.Installtherearwheelintothecastorfork.Insert
thewheelboltintooneofthecastorforkmounting
holes,installaspacer(suppliedinlooseparts),and
slidetheboltthroughthewheel.
4.Installanotherspacerontotheboltandroutethe
boltthroughtheremainingcastorforkmounting
hole.
5.Positionthebendofthewheelboltheadunderthe
bottomedgeoftheadapterplate(Figure3).Install
andtightenthelocknuttosecurethewheeltothe
castorfork.Donotovertightenthelocknutasthe
wheelmustrotatefreely.
Figure3
1.Rearwheel
4.Rearcastorfork
2.Hub5.Wheelbolt
3.Nut
6.Spacer(2)
6.Wipethegreasettingcleanonthewheelassembly.
Pumpgreaseintothewheelhubuntilgreaseisseen
exitingatbothhubbearings.Wipeupexcessgrease.
2
MountingtheSeat
Partsneededforthisprocedure:
1
Seat
4
Nut(5/16inch)
Procedure
Note:Mounttheseatslidesinthefrontsetof
mountingholestogainanadditional3in.(7.6cm)inthe
forwardadjustment,orintherearmountingholesfor
anadditional3in.(7.6cm)intherearwardadjustment.
1.Removethelocknutssecuringtheseatslidestothe
plywoodshippingbase.Discardthelocknuts.
2.Connectthewireharnesstotheseatswitch.
3.Securetheseat,seatpanel,andseatslidestothe
seatsupportwiththelocknuts(5/16in.)(Figure4)
suppliedinthelooseparts.
13