Operator's Manual

Figure19
1.Transportplate
4.Chainlink
2.Adjustingscrew
5.7/8inch(22mm)
3.Transportplatemounting
screw
Figure20
1.Transportplate4.Linkhook
2.Adjustingscrew
5.7/8inch(22mm)
3.Transportplatemounting
screw
3.Oncuttingunitsequippedwithaoffsetlifthook
(Figure21,inset)verifythatthedistancefromthe
topofthecarrierframeadjustingscrewtotheback
ofthecarrierframeis1inch(25mm).Ifthedistance
isnot1inch(22mm),proceedtostep4.
Figure21
1.Transportplate
4.Offsetlifthook
2.Adjustingscrew
5.1inch(25mm)
3.Transportplatemounting
screw
4.Loosenthetransportplatemountingscrews
(Figure19,Figure20andFigure21).
5.Raisethecuttingunitstothetransportposition.
Important:Donotraisethesuspensiontothe
transportpositionwhenthereelmotorsarein
theholdersinthemachineframe.Damageto
themotorsorhosescouldresult.
6.Ensureeachcarrierframeisatthesameheightfrom
theground.Iftheyare,proceedtostep8.
7.Ifthecarrierframesarenotatthesameheight,
loosenthejamnutonthecarrierframeadjusting
screw(Figure19,Figure20andFigure21).Rotate
thescrewoutwardtoraiseandinwardtolower.
Tightenthejamnutaftertheproperheightis
obtained.
8.Rotatethetransportplateuntilitlocksthepull
frame.Tightenthescrews.
21