Operator's Manual

WARNING
Batteryterminalsormetaltoolscouldshort
againstmetaltractorcomponentscausing
sparks.Sparkscancausethebatterygassesto
explode,resultinginpersonalinjury.
•Whenremovingorinstallingthebattery,
donotallowthebatteryterminalstotouch
anymetalpartsofthetractor.
•Donotallowmetaltoolstoshortbetween
thebatteryterminalsandmetalpartsof
thetractor.
2.Connectthepositivebatterycable(red)fromthe
startersolenoidtothepositivepost(+)ofthebattery
(Figure8).Secureitwithawrenchandcoatthe
terminalwithpetroleumjelly.Makesurethecablewill
cleartheseat,intherear-mostposition,whichcould
causewearordamagetothecable.
Figure8
1.Negative(-)2.Positive(+)
3.Connecttheblackgroundcabletothenegative(-)post
ofthebattery.Secureitwithawrenchandcoatthe
terminalwithpetroleumjelly.
WARNING
Incorrectbatterycableroutingcoulddamage
thetractorandcablescausingsparks.Sparks
cancausethebatterygassestoexplode,
resultinginpersonalinjury.
•Alwaysdisconnectthenegative(black)
batterycablebeforedisconnectingthe
positive(red)cable.
•Alwaysconnectthepositive(red)battery
cablebeforeconnectingthenegative
(black)cable.
4.Placetheterminalcoversoverthebatteryposts.
5.Installthebatteryclampandcoversandsecurethem
withthewingnuts.
5
MountingtheFrontRollers
Partsneededforthisprocedure:
2Anti-scalproller
2Pulllinkassembly
2
Rollershaft
2
Spacer
4Washer
2
Locknut,3/8–16
Procedure
1.Mountananti-scalprollerandapulllinkassemblyto
theouterendofeachfrontcarrierframewitharoller
shaft,spacer,washersandlocknut(Figure9).Make
surethecomponentsarearrangedasshownandthe
nylonbushingsareinthepulllink.
Figure9
1.Anti-scalproller
5.Washer(2)
2.Pulllinkassembly
6.Spacer
3.Pulllinkextension
7.Nylonbushing(2)
4.Balljointreceiver
2.Makesurealltiresareinatedto8–12psi.
15