Operator's Manual

Figure15
1.Snapring
2.Drivecoupler
E.Applygreasetotheinsidediameterofthedrive
coupler.Installthedrivecouplertotheleftendof
thecuttingunitreeltubewithasnapring.
F.Installthemotormounttotheleftendof
thecuttingunitwiththe(2)allenheadscrews
previouslyremoved.Torquescrewsto12–15
ft–lbs.(16–20N⋅m).
G.Installthecounterweighttotherightendofthe
cuttingunitwiththescrewspreviouslyremoved.
4.Thecuttingunitisshippedwithoutafrontroller.
Obtainaroller(ModelNo.04625,04626or04627)
fromyourlocalToroDistributor.Installtheroller
usingtheloosepartssuppliedwiththecuttingunitand
installationinstructionsincludedwiththeroller.
5.Threadaballstudintoeachendofthecuttingunit
frontroller(Figure16).
Figure16
1.Ballstud
6.Slidethecuttingunitunderthepullframewhile
hookingthelifthoopontotheliftarm.
7.Slidethesleevebackoneachballjointreceiverand
hookthereceiverontothecuttingunitballstud
(Figure17).
Figure17
1.Pulllinkextension3.Balljointreceiver
2.Pullarm
8.Mountthebasketontothecarrierframe.
9.Adjustthepulllinksuntilthereis1/16to1/8in.(2to
3mm)clearancebetweenthelipofthebasketandthe
reelblades.Makesurethebasketlipsareequidistant
fromthereelbladesallthewayacrossthereelblades.
10.Assemblethemountingscrewsforthereeldrivemotor
toeachcuttingunit.Leaveapproximately1/2in.(13
mm)ofthethreadsexposedoneachmountingscrew
(
Figure18).
Figure18
1.Screws
2.Drivemotor
11.Usingahandpumpgreasegun,llthecavityattheend
ofthecuttingunitwith#2generalpurposegrease.
12.Coatthesplineshaftofthemotorwithcleangrease
andinstallthemotorbyrotatingthemotorclockwise
sothemotorangesclearthestuds.Rotatethemotor
18