Service Bulletin

6. The powered rear roller brush has a reinforcement bracket

kit (104-2066) available to strengthen the rear mounting

frame. This kit is helpful when removing the reels for

“bench” servicing. One kit includes 3 brackets and

hardware.

7. In some applications, the GR 3200 series cutting units may

contribute to aftercut turf color variations. A longer Bedknife

(99-4299) and a smaller front Roller (99-6241) may help

reduce this problem in some conditions. Do not install on

cutting units equipped with the groomer accessory.

8. Some older GR 3100 and 3050’s may have minor

interference between the Tri-roller frame and a front

hydraulic line when the roller frames are raised. New Tubes

(100-6431) increase the clearance. Parts orders are

automatically cross referenced.

9. The Drive Belt (104-7715) for the GR 3000 series ground

driven rear roller brush was improved and is now a light tan

color. Parts orders are automatically cross referenced.

10. When desiring higher heights of cut (HOC) with appropriate

GR 3200 series cutting units, the High Height of Cut Kit (99-

1496) is now available. This kit lowers the front roller and

raises the front of the cutting unit. In some applications,

maximum HOC range can extend to 1-

inches.

11. When operating a GR 3100 or 3050 on greens with deep

undulations, the center carrier frame basket rod may

occasionally catch under the frame. A small Bracket (104-

2083) is now available and can be clamped and welded to

the frame as illustrated (either side or both). The Frame was

extended on current production units. We suggest hiring a

certified welder for this task.

Bracket (104-2083)

Carrier Frame Basket Rod

Ref: 01-01 Copyright



, 2000. The Toro Company