Operator's Manual

Maintenance Service

Interval

Maintenance Procedure

Every 800 hours

• Replace the hydraulic oil.

• Replace the hydraulic oil filter.

• Check the engine RPM (idle and full throttle)

• Replace the fuel filter/water separator canister.

Every 2000 hours or 2

years

• Replace moving hoses.

• Replace safety switches.

• Drain/flush the fuel tank.

• Drain/flush the hydraulic tank.

• Drain/flush the cooling system.

Important Refer to your engine operator’s manual for additional maintenance procedures.

Caution

If you leave the key in the ignition switch, someone could accidently start the engine and

seriously injure you or other bystanders.

Remove the key from the ignition and disconnect the wire from the spark plug before you do any

maintenance. Set the wire aside so that it does not accidentally contact the spark plug.