Service Manual

Greensmaster 3250−D
Page 5 − 5
Electrical System (Rev. C)
Starting Problems (continued)
Problem Possible Causes
Engine cranks, but does not start. Wiring to start circuits (see Wiring Schematics) is
loose, corroded, or damaged.
Diode D5 circuit is open.
Run relay or high temperature relay is faulty.
High temperature switch is shorted.
ETR solenoid is faulty.
Glow plugs are faulty.
Engine or fuel system is malfunctioning (see Chapter 4
− Engine).
Engine and fuel may be too cold.
Engine cranks (but should not) with the Functional
Control Lever in the MOW or TRANSPORT position.
Neutral sensor is out of adjustment, faulty, or short
circuited.
Electrical
System