Service Manual

Greensmaster 3250−DGroomer (DPA Cutting Unit) (Rev. D) Page 7.2 − 2
Specifications
MOUNTING: The groomer is mounted to the Dual Point
Adjust (DPA) cutting reel bearing housings and frame.
REEL CONSTRUCTION: 2.375 inch (6 cm) diameter,
41 steel blades with 1/2 inch blade spacing. Blade spac-
ing can be adjusted to 1/4 inch or 3/4 inch by altering the
position of blade spacers on the groomer.
GROOMER PENETRATION: From .410 inch (10.4
mm) above ground level to 0.125 inch (3.2 mm) below
ground level, at mowing HOC range of .062 to .296 inch
(1.6 to 7.5 mm).
WIDTH−OF−GROOMER: 19 inches (48.3 cm).
HEIGHT ADJUSTMENT KNOB: Allows a 0.003 inch
(0.08 mm) increment of height adjustment for each click
of the adjuster.
UP−DOWN FEATURE: At lower height of cut settings,
allows groomer reel to be raised above the height/depth
adjustment for no groomer reel action while cutting. At
higher height of cut settings, groomer may have to be in
the raised position for effective groomer operation.