Service Manual

Greensmaster 3250−D Groomer (DPA Cutting Unit) (Rev. D)Page 7.2 − 3
General Information
Groomer Position
IMPORTANT: Before changing groomer position,
make certain that the reel drive is in the disengaged
position and that the cutting reel is not rotating.
To place the groomer reel in the raised, non−grooming
position, remove the lock screw and rotate the lift arm to
raise the groomer reel. Install the lock screw to retain the
groomer reel in the non−grooming position (Fig. 1).
To place the groomer reel in the lowered, grooming posi-
tion, remove the lock screw and rotate the lift arm to low-
er the groomer reel. Install the lock screw to retain the
groomer reel in the grooming position (Fig. 2).
1. Lift arm 2. Lock screw (transport)
Figure 1
1
2
1. Lift arm 2. Lock screw (grooming)
Figure 2
1
2
Groomer
(DPA Cutting Unit)