Installation Instructions

FormNo.3369-823RevA
Three-WheelDriveKitwithoutROPS
Groundsmaster3250-DTractionUnit
ModelNo.04477
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
Removetheexistingwheel.
2
Nopartsrequired
Modifythecasterfork.
Motorandhubassembly1
Re-lubeangette
1
Standardangette
1
Bearing1
Socket-headscrew
2
Locknut(1/2inch)
2
Hardenedwasher3
Spacer
1
Adapterplate1
Hex-headbolt3
3
Decal2
Installthemotorandhubassembly
Self-tappingscrews
4
Tubeclamp4
Coverplate
2
Hex-headscrew(M8)
2
Locknut(M8)
2
Hoseassembly(95-0517)
1
Hoseassembly(100-6412)
1
Hoseclampbracket2
4
Cabletie
1
Installthehoses.
1
RemovingtheExistingWheel
NoPartsRequired
Procedure
1.Parkthetractoronalevelsurface,settheparking
brake,turntheignitionkeytoOfftostoptheengine,
andremovethekeyfromtheignitionswitch.
WARNING
Accidentalstartingoftheenginecouldseriously
injureyouorotherbystanders.
Removethekeyfromtheignitionswitchbefore
youinstallthekit.
2.Disconnectrstthenegativecable,thenthepositive
cablefromthebattery.
3.Lifttherearofthetractionunitbythehoopwelded
onthecasterfork,andremovethetireassembly
fromthecasterfork.
4.Removethewheelhubassemblyfromthetire
assembly.
Note:Retainthelugnuts.
5.Removetheadapterplatesfromthecasterfork.
©2011—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved

Summary of content (8 pages)