Operator's Manual

9
Lubrication
There are (6) grease fittings on each dethatching unit,
which must be lubricated after every 15 hours of operation.
Lubricate using a #2 multipurpose lithium base grease. A
hand operated grease gun is recommended for best results.
1. Wipe each grease fitting with a clean rag.
2. Apply grease to reel bearings, front roller bearings and
rear wheel bearings until pressure is felt.
(2)
(2)
(2)
Figure 10
Important Do not apply too much pressure or grease
seals will be permanently damaged.
3. Wipe excess grease away.