Operator's Manual

4
Optional Equipment
High Cut Bedknife Part No. 94–6392
Low Cut Bedknife Part No. 93–4264
Micro–Cut Bedknife Part No. 93–4262
Fairway Bedknife Part No. 63–8600
Full Roller (Set of three) Model No. 04620
Close–spaced Wiehle Roller
(Set of three)
Model No 04626
Wide–spaced Wiehle Roller
(Set of three)
Model No. 04627
Rear Wiehle Roller
(Set of three)
Model No. 04425
Groomer for Greensmaster
3050/3100/3150
(Set of three)
Model No. 04630
Groomer for Greensmaster 3250
(Set of three)
Model No. 04631
Powered Roller Brush for
Greensmaster 3050/3100/3150
(Set of three)
Model No. 04640
Powered Roller Brush for
Greensmaster 3250
(Set of three)
Model No. 04641
Close Wiehle Scraper Kit
(One scraper)
Part No. 106-4661
Wide Wiehle Scraper Kit
(One scraper)
Part No. 106-4662
Full Roller Scraper Kit
(One scraper)
Part No. 106-4663
Rear Roller Scraper Kit
(Set of three)
Model No. 04646
High Height Of Cut Kit
(One kit per cutting unit)
Part No. 106-4699
5 Blade Heavy Duty Reel
(One reel weld assembly)
Part No. 106-2626
Groomer Brush Assembly
(One brush)
Part No. 107-8125
Note: Specifications and design subject to change without
notice.
Setup
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts Chart
Note: Use this chart as a checklist to ensure all parts necessary for assembly have been shipped. If any of these parts are
missing, total setup cannot be completed.
Description
Qty. Use
Ball stud 2 Mount to roller
Operator’s manual 1 Read before operating the machine.
Parts catalog 1
Certificate of compliance 1
Registration cards 2 Fill out and return to Toro.